4 Airush heavyweight Pigtails set for all 4 line kites.
This pigtail set is a replacement part for the pigtails you’ll find on all 4 line bridled Airush kites 2014 and onwards, reinforced heavier weight version, for added durability.
Also suitable for all pre 2014 Airush kites and also any other kites or line sets.
4 x Universal heavyweight Pigtails set for all 4 line kites.
This pigtail set is a replacement or additional part for the pigtails you’ll find on all 4 line bar & lines. Fitting them to your line ends add life to your bar as these inexpensive pigtails take all the wear rather than damaging the lines. Plus they give you the versatility to use your bar on any type or brand of kite.
Two types available:
4mm stitched dyneema, 2 x knots, 2 x loops – Very durable and better than most of the pigtails that come with kite bars originally.
3mm sleeved dyneema – 4 x loop knots – Multi attachment allowing any line end to be used as a knot or a loop. Giving you the ability to fit the bar onto any 4 line kite, no matter what configuration of loops and knots. Very useful if you have different brands of kite in your quiver.
We also have the 3mm pigtails – 4 x loop knots- in the new minimalistic version, which have reduced weight and drag – See image 3
These pigtails will fit the following brands (plus many others):
This Airush red safety line is for all low Y, 2013-2021 Airush bars. It is 1.2 meters long and fits many other bands as well such as Liquid Force, Slingshot and Peter Lynn.
This red safety line attaches at one end to the circular ring onto which your safety leash clips to. It passes through the brain quick release mechanism, through the centre of the bar and directly to the Y splitter. It’s is the elasticised piece that activates the safety release when you activate the system on the Brain quick release. It can suffer wear as it slides through the bar, and should be replaced periodically depending on use.
The Airush red safety line will fit the Core, Access, Ultra, Progression, Diamond, Analog(Analogue) and Smart bars plus many more, check with us if you are unsure
This is the Peter Lynn orange safety line that fits the Navigator bar v5/6.
Around 80cm unstretched, 125cm at full stretch.
The Navigator safety line can also be used with other bars around the same length, contact us if you want info on other brands that it fits in.
This safety line attaches at one end to the circular ring onto which your safety leash clips to. It passes through the quick release mechanism, through the centre of the bar and directly to the splitter.
It’s is the elasticised piece that activates the safety release when you activate the system on the quick release. It can suffer wear as it slides through the bar, and should be replaced periodically depending on use.
The Duotone Short Safety Leash is designed to be attached at either the front or side of the harness for easy release activation. As well as this, it also has:
– Foam covered carabiner
– Dyneema rope inside
– Quick release
– Steel carabiners on one end
– Release rope to attach to harness
The Duotone kite leash only uses carabiners one end with the rope attachment where it meets the harness, great for those carbon harnesses that you don’t want to scratch and easy to fit into leash eyelets on Mystic harnesses, a simple, safe release system.
This will fit all model of kite, and with it’s simple push away release, it works 100% of the time.
Check out our handy guide to maintaining all of your equipment here.
The Duotone Long Neoprene Kite Leash is designed to be attached at either the front, side or rear of the harness.
The neoprene cover makes it very comfortable to hold so great when you are having to pull the bar back towards you after missing a handle pass, plus foam covered carabiner to stop it unclipping.
Foam covered carabiner
Dyneema rope inside
Quick release
Steel carabiners on one end
Release rope to attach to harness
Thick neoprene protection padding on leash
This leash uses only carabiners on one end, with the rope attachment where it meets the harness, great for those carbon harnesses that you don’t want to scratch.
This will fit all model of kites, and with it’s simple, safe push away release system, works 100% of the time.
Check out our handy guide to maintaining all of your equipment here.
This Universal Airush handle pass kite leash links all harnesses to either the ring on the chicken loop which activates the 100% flag out font line safety, or to the chicken loop to be used in ‘suicide’ mode when practicing and performing handlepasses.
This is the Hardcore leash for freestyle riding with additional attachment options on the harness side. Long length for looping over the head after handlepasses and rotations. Reinforced for direct attachment to the chicken loop.
It’s very strong and tough, longer length to be used for freestyle and also has a push away quick release built into the end that attaches to your harness.
This RRD short kite safety leash will fit onto all kite harnesses and kite safety line attachment ring near the chicken loop of your bar.
It is designed to be attached at either the front or side of the harness for easy release activation.
It’s very strong and tough with high quality, soft webbing outer and oversize carabiner for easy clipping on and off. The shorter length is ideal for riders who are not looking to do unhooked freestyle tricks, whether your are freeriding, waveriding, foiling or learning.
The RRD kite leash uses a larger, extra strong carabiner at one end with the rope attachment the other, where it meets the harness. Great for those carbon harnesses that you don’t want to scratch and easy to fit into spreader bar leash eyelets on Mystic harnesses, a simple, safe release system.
This will fit all model of kite, and with it’s simple push away release, it works 100% of the time.
Check out our handy guide to maintaining all of your equipment here..